PORTS(7) FreeBSD Miscellaneous Information Manual PORTS(7)

NAME

portscontributed applications

DESCRIPTION

The FreeBSD Ports Collection offers a simple way for users and administrators to install applications. Each port contains any patches necessary to make the original application source code compile and run on FreeBSD. Compiling an application is as simple as typing make build in the port directory! The Makefile automatically fetches the application source code, either from a local disk or via FTP, unpacks it on your system, applies the patches, and compiles it. If all goes well, simply type make install to install the application.

For more information about using ports, see “Packages and Ports” in The FreeBSD Handbook, (file:/usr/share/doc/en_US.ISO8859-1/books/handbook/ports.html or http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/ports.html). For information about creating new ports, see The Porter's Handbook (file:/usr/share/doc/en_US.ISO8859-1/books/porters-handbook/index.html or http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/porters-handbook/).

TARGETS

Some of the targets work recursively through subdirectories. This lets you, for example, install all of the “biology” ports. The targets that do this are build, checksum, clean, configure, depends, extract, fetch, install, and package.

The following targets will be run automatically by each proceeding target in order. That is, build will be run (if necessary) by install, and so on all the way to fetch. Usually, you will only use the install target.

config
Configure OPTIONS for this port using dialog4ports(1).
fetch
Fetch all of the files needed to build this port from the sites listed in MASTER_SITES and PATCH_SITES. See FETCH_CMD, MASTER_SITE_OVERRIDE and MASTER_SITE_BACKUP.
checksum
Verify that the fetched distfile's checksum matches the one the port was tested against. If the distfile's checksum does not match, it also fetches the distfiles which are missing or failed the checksum calculation. Defining NO_CHECKSUM will skip this step.
depends
Install (or compile if only compilation is necessary) any dependencies of the current port. When called by the extract or fetch targets, this is run in piecemeal as fetch-depends, build-depends, etc. Defining NO_DEPENDS will skip this step.
extract
Expand the distfile into a work directory.
patch
Apply any patches that are necessary for the port.
configure
Configure the port. Some ports will ask you questions during this stage. See INTERACTIVE and BATCH.
build
Build the port. This is the same as calling the all target.
install
Install the port and register it with the package system. This is all you really need to do.

The following targets are not run during the normal install process.

showconfig
Display OPTIONS config for this port.
showconfig-recursive
Display OPTIONS config for this port and all its dependencies.
rmconfig
Remove OPTIONS config for this port.
rmconfig-recursive
Remove OPTIONS config for this port and all its dependencies.
config-conditional
Skip the ports which have already had their OPTIONS configured.
config-recursive
Configure OPTIONS for this port and all its dependencies using dialog4ports(1).
fetch-list
Show list of files to be fetched in order to build the port.
fetch-recursive
Fetch the distfiles of the port and all its dependencies.
fetch-recursive-list
Show list of files that would be retrieved by fetch-recursive.
run-depends-list, build-depends-list
Print a list of all the compile and run dependencies, and dependencies of those dependencies, by port directory.
all-depends-list
Print a list of all dependencies for the port.
pretty-print-run-depends-list, pretty-print-build-depends-list
Print a list of all the compile and run dependencies, and dependencies of those dependencies, by port name and version.
missing
Print a list of missing dependencies to be installed for the port.
clean
Remove the expanded source code. This recurses to dependencies unless NOCLEANDEPENDS is defined.
distclean
Remove the port's distfiles and perform the clean target. The clean portion recurses to dependencies unless NOCLEANDEPENDS is defined, but the distclean portion never recurses (this is perhaps a bug).
reinstall
Use this to restore a port after using pkg_delete(1) when you should have used deinstall.
deinstall
Remove an installed port from the system, similar to pkg_delete(1).
deinstall-all
Remove all installed ports with the same PKGORIGIN from the system.
package
Make a binary package for the port. The port will be installed if it has not already been. The package is a .tbz file that you can use to install the port on other machines with pkg_add(1). If the directory specified by PACKAGES does not exist, the package will be put into the current directory. See PKGREPOSITORY and PKGFILE.
package-recursive
Like package, but makes a package for each depending port as well.
package-name
Prints the name with version of the port.
readmes
Create a port's README.html. This can be used from /usr/ports to create a browsable web of all ports on your system!
search
Search the INDEX file for the pattern specified by the key (searches the port name, comment, and dependencies), name (searches the port name only), path (searches the port path), info (searches the port info), maint (searches the port maintainer), cat (searches the port category), bdeps (searches the port build-time dependency), rdeps (searches the port run-time dependency), www (searches the port web site) make(1) variables, and their exclusion counterparts: xname, xkey etc. For example, one would type:

cd /usr/ports && make search name=query

to find all ports whose name matches “query”. Results include the matching ports' path, comment, maintainer, build dependencies, and run dependencies.

cd /usr/ports && make search name=pear- \ 
    xbdeps=apache

To find all ports whose names contain “pear-” and which do not have apache listed in build-time dependencies.

cd /usr/ports && make search name=pear- \ 
    xname='ht(tp|ml)'

To find all ports whose names contain “pear-”, but not “html” or “http”.

make search key=apache display=name,path,info keylim=1

To find ports that contain “apache” in either of the name, path, info fields, ignore the rest of the record.

By default the search is not case-sensitive. In order to make it case-sensitive you can use the icase variable:

make search name=p5-R icase=0
quicksearch
Reduced search output. Only display name, path and info.
describe
Generate a one-line description of each port for use in the INDEX file.
maintainer
Display the port maintainer's email address.
index
Create /usr/ports/INDEX, which is used by the pretty-print-* and search targets. Running the index target will ensure your INDEX file is up to date with your ports tree.
fetchindex
Fetch the INDEX file from the FreeBSD cluster.

ENVIRONMENT

You can change all of these.
PORTSDIR
Location of the ports tree. This is /usr/ports on FreeBSD and OpenBSD, and /usr/pkgsrc on NetBSD.
WRKDIRPREFIX
Where to create any temporary files. Useful if PORTSDIR is read-only (perhaps mounted from a CD-ROM).
DISTDIR
Where to find/put distfiles, normally distfiles/ in PORTSDIR.
PACKAGES
Used only for the package target; the base directory for the packages tree, normally packages/ in PORTSDIR. If this directory exists, the package tree will be (partially) constructed. This directory does not have to exist; if it does not, packages will be placed into the current directory, or you can define one of
PKGREPOSITORY
Directory to put the package in.
PKGFILE
The full path to the package.
LOCALBASE
Where existing things are installed and where to search for files when resolving dependencies (usually /usr/local).
PREFIX
Where to install this port (usually set to the same as LOCALBASE).
MASTER_SITES
Primary sites for distribution files if not found locally.
PATCH_SITES
Primary locations for distribution patch files if not found locally.
MASTER_SITE_FREEBSD
If set, go to the master FreeBSD site for all files.
MASTER_SITE_OVERRIDE
Try going to these sites for all files and patches, first.
MASTER_SITE_BACKUP
Try going to these sites for all files and patches, last.
RANDOMIZE_MASTER_SITES
Try the download locations in a random order.
MASTER_SORT
Sort the download locations according to user supplied pattern. Example:
.dk .sunet.se .se dk.php.net .no .de heanet.dl.sourceforge.net
MASTER_SITE_INDEX
Where to get INDEX source built on FreeBSD cluster (for fetchindex target). Defaults to http://www.FreeBSD.org/ports/.
FETCHINDEX
Command to get INDEX (for fetchindex target). Defaults to “fetch -am”.
NOCLEANDEPENDS
If defined, do not let clean recurse to dependencies.
FETCH_CMD
Command to use to fetch files. Normally fetch(1).
FORCE_PKG_REGISTER
If set, overwrite any existing package registration on the system.
MOTIFLIB
Location of libXm.{a,so}.
INTERACTIVE
If defined, only operate on a port if it requires interaction.
BATCH
If defined, only operate on a port if it can be installed 100% automatically.
DISABLE_VULNERABILITIES
If defined, disable check for security vulnerabilities using pkg-audit(8) when installing new ports.
NO_IGNORE
If defined, allow installation of ports marked as <FORBIDDEN>. The default behavior of the Ports framework is to abort when the installation of a forbidden port is attempted. Of course, these ports may not work as expected, but if you really know what you are doing and are sure about installing a forbidden port, then NO_IGNORE lets you do it.
NO_CHECKSUM
If defined, skip verifying the port's checksum.
TRYBROKEN
If defined, attempt to build a port even if it is marked as <BROKEN>.
PORT_DBDIR
Directory where the results of configuring OPTIONS are stored. Defaults to /var/db/ports. Each port where OPTIONS have been configured will have a uniquely named sub-directory, containing a single file options.

MAKE VARIABLES

The following list provides a name and short description for many of the variables that are used when building ports. More information on these and other related variables may be found in ${PORTSDIR}/Mk/* and the FreeBSD Porter's Handbook.
WITH_OPENSSL_PORT
(bool) If set, causes ports that make use of OpenSSL to use the OpenSSL from ports (if available) instead of the OpenSSL from the base system.
WITH_DEBUG
(bool) If set, debugging symbols are installed for ports binaries.
WITH_DEBUG_PORTS
A list of origins for which to set WITH_DEBUG_PORTS.
WITH_SSP_PORTS
(bool) If set, enables -fstack-protector for most ports.
WITH_GHOSTSCRIPT_VER
If set, the version of ghostscript to be used by ports.
OVERRIDE_LINUX_BASE_PORT
The default linux base to use.
WITH_CCACHE_BUILD
(bool) If set, enables the use of ccache(1) for building ports.
CCACHE_DIR
Which directory to use for the ccache data.

FILES

/usr/ports
The default ports directory
/usr/ports/Mk/bsd.port.mk
The big Kahuna.

SEE ALSO

make(1), make.conf(5), pkg(8), portsnap(8)

The following are part of the ports collection:

pkg(7), portlint(1)

The FreeBSD Handbook.

http://www.FreeBSD.org/ports (searchable index of all ports)

HISTORY

The Ports Collection appeared in FreeBSD 1.0. It has since spread to NetBSD and OpenBSD.

AUTHORS

This manual page was originated by David O'Brien.

BUGS

Ports documentation is split over four places — /usr/ports/Mk/bsd.port.mk, The Porter's Handbook, the “Packages and Ports” chapter of The FreeBSD Handbook, and this manual page.
June 6, 2014 FreeBSD 10.2